Company Directory › Robotics › Core Components › FAULHABER vs HIWIN Technologies
FAULHABER vs HIWIN Technologies
FAULHABER and HIWIN Technologies are both robotics core components companies. Their verified profiles differ on headquarters and product lines. The table below sets out only those rows; everything else is on each company's own profile. Facts verified 6 November 2026.
Where they differ
| Company | FAULHABER | HIWIN Technologies |
|---|---|---|
| Headquarters | Schonaich, Baden-Wurttemberg, Germany | Taichung, Taiwan |
| Product lines | DC micromotors with coreless winding, brushless DC motors, stepper and linear motors, precision gearheads, encoders and motion controllers | ball screws, linear guideways and DATORKER strain wave gearing |
Market context: Germany
Industrial robot installations, 2025: fewer than 25,000 (-8% year on year). This counts industrial robots installed in Germany during the year, whichever country the supplier comes from; it describes the destination market and is not a figure about FAULHABER.
Source: International Federation of Robotics (IFR), World Robotics 2026, released 24 September 2026.
How FAULHABER and HIWIN Technologies differ
FAULHABER, headquartered in Schönaich, Baden-Württemberg, Germany, works at miniature scale, with DC micromotors with coreless winding, brushless DC motors, stepper and linear motors, precision gearheads, encoders and motion controllers. HIWIN, headquartered in Taichung, Taiwan, builds linear hardware instead: ball screws and linear guideways, plus DATORKER strain wave gearing on the rotary side. The pairing is therefore a miniature-drive maker set against a linear-motion maker, not two rival motor catalogues. FAULHABER, founded in 1947 and family-run, employs more than 2,000 people, while HIWIN, founded in 1989, employs approximately 6,400. The commercial shapes behind the catalogues differ too: FAULHABER is an independent group that began in 1947 as precision mechanical workshops and has stayed family-run, while HIWIN is listed on the Taiwan Stock Exchange under TWSE: 2049. That separates their typical buyers as well: FAULHABER's miniature and micro drives are specified where the whole drive has to shrink along with the device it powers, whereas HIWIN's screws and guideways are bought as the linear backbone of a machine, supported by subsidiaries, R&D centres and distributors in markets including the US, Germany, Japan, China, Korea and Singapore.
Frequently asked questions
What is the main difference between FAULHABER and HIWIN Technologies?
FAULHABER is based in Schonaich, Baden-Wurttemberg, Germany and HIWIN Technologies in Taichung, Taiwan; they also differ on product lines. The table above sets out both companies' entries row by row.
Are FAULHABER and HIWIN Technologies in the same country?
No. FAULHABER is based in Schönaich, Baden-Württemberg, Germany and HIWIN Technologies in Taichung, Taiwan — No. 7, Jingke Road, Nantun District, Taichung City.
Can one sourcing request reach both FAULHABER and HIWIN Technologies?
Yes. FAULHABER can be reached through faulhaber.com and HIWIN Technologies through hiwin.tw, or post one sourcing request and let both answer if they fit.
Is one of these two companies placed higher by GlobleMatch?
No. There is no pay-to-rank and no paid placement in comparisons; order and content come from verified profile facts only.
Run FAULHABER or HIWIN Technologies? Claim your free profile to keep your facts current.
Full profiles, with every fact and its source: FAULHABER and HIWIN Technologies. Profile facts last verified: FAULHABER on 6 November 2026, HIWIN Technologies on 6 November 2026.