Company Directory › Robotics › Complete Robots & Platforms › Dobot vs FANUC
Dobot vs FANUC
Dobot and FANUC are both complete robots & platforms companies. Their verified profiles differ on headquarters and product lines. The table below sets out only those rows; everything else is on each company's own profile. Facts verified 6 November 2026.
Where they differ
| Company | Dobot | FANUC |
|---|---|---|
| Headquarters | Shenzhen, China | Oshino-mura, Yamanashi Prefecture, Japan |
| Product lines | CRA series and CR 30H collaborative robots, Nova ultra-compact cobots, Magician E6 and MG400 desktop cobots, DOBOT ATOM humanoid and the X-Trainer teleoperation platform | More than 100 industrial robot models including CRX collaborative robots; CNC systems; servo motors and lasers; ROBODRILL, ROBOSHOT and ROBOCUT machine tools |
Market context: China
Industrial robot installations, 2025: 354,000 (rounded), +20% year on year. This counts industrial robots installed in China during the year, whichever country the supplier comes from; it describes the destination market and is not a figure about Dobot.
Source: International Federation of Robotics (IFR), World Robotics 2026, released 24 September 2026.
Market context: Japan
Industrial robot installations, 2025: 36,219 (-19% year on year). This counts industrial robots installed in Japan during the year, whichever country the supplier comes from; it describes the destination market and is not a figure about FANUC.
Source: International Federation of Robotics (IFR), World Robotics 2026, released 24 September 2026.
How Dobot and FANUC differ
FANUC's catalogue runs to more than 100 industrial robot models alongside CNC systems, servo motors and lasers, plus ROBODRILL, ROBOSHOT and ROBOCUT machine tools, while Dobot concentrates on collaborative robots: the CRA series and CR 30H, Nova ultra-compact cobots, Magician E6 and MG400 desktop cobots, the DOBOT ATOM humanoid and the X-Trainer teleoperation platform. FANUC's robot count sits inside a wider machine-tool ecosystem, so a buyer can pair arms with the controls and machining centres that surround them on a line. Scale separates them too: FANUC, headquartered in Oshino-mura, Yamanashi Prefecture, was founded in 1972 and employs 10,113 people, whereas Dobot, headquartered in Shenzhen, was founded in 2015. The depth runs backwards as well as outwards: FANUC's numerical-control development began in 1955 as a Fujitsu project team, and its network now runs to 250+ locations worldwide. Both reach widely, FANUC across 105+ countries and Dobot across 100+ countries and regions. Both are listed manufacturers, FANUC on the Tokyo Stock Exchange and Dobot on the Hong Kong Main Board, where its shares debuted in a December 2024 IPO.
Frequently asked questions
What is the main difference between Dobot and FANUC?
Dobot is based in Shenzhen, China and FANUC in Oshino-mura, Yamanashi Prefecture, Japan; they also differ on product lines. The table above sets out both companies' entries row by row.
Are Dobot and FANUC in the same country?
No. Dobot is based in Shenzhen, China and FANUC in Oshino-mura, Yamanashi Prefecture, Japan.
Is it possible to buy from Dobot and FANUC at the same time?
Yes. Dobot can be reached through dobot-robots.com and FANUC through fanuc.co.jp, or post one sourcing request and let both answer if they fit.
How does GlobleMatch rank these two companies?
It does not. There is no pay-to-rank and no paid placement in comparisons; order and content come from verified profile facts only.
Run Dobot or FANUC? Claim your free profile to keep your facts current.
Full profiles, with every fact and its source: Dobot and FANUC. Profile facts last verified: Dobot on 6 November 2026, FANUC on 6 November 2026.